A smelter feed system consists of a conveyor belt feeding, jaw crusher through into the next process. A night shift (0:00 to eight in the morning), Wang workers in this position
is responsible for operating, because the duty of broken chunks of raw materials are more difficult to eat into the crusher encountered
Chunks of ore must stop the ore out, first of its artificial Zacheng pieces with a sledgehammer. Normal operation when feeding shift production tasks completed more than five
hours long, which returned from there two hours after hours on duty until the completion of tasks around 60%. Six o'clock
So, an aniseed into the crusher, linear vibrating screen operator Wang saw just kept idling, ore no go, they put a belt conveyor stopped, walked straight up to the crusher feed opening, left
foot on the console edge, right hard to step crusher ore feed port. Final stones
To be squeezed in, but because of too much force Wang, right foot into the crusher, all of the following folders broken ankle.
Direct cause
Wang illegal operation. In order to complete the shift of production tasks, anxious. In accordance with the procedures specified crusher plant, crusher is jammed material must
stop processing. And Wang did not take measures to stop treatment, but with the foot lump ores, resulting in the accident
Happen.
Indirect causes
1, the plant safety management lax. Wang Failing to wear protective shoes to work, duty squad discovery of this situation has not put a stop to.
2, employee safety awareness is weak. Wang if this accident a little more than self-protection awareness, completely avoid the accident.
3, heavy production does not result in the heavy security is also one of the reasons the incident occurred.
Responsibility
The plant safety authorities and through the accident scene investigation and analysis of the operating environment, decided that this was man-made accidents. Wang primary
responsibility for the accident, neglect of duty squad management is also due for the accident can not shirk responsibility. Responsibility for two people into the plant
Line treatment: Wang has constituted serious injuries, no longer do economic sanctions, to be recovered 30 days after the stoppage reflect and write a written guarantee. Duty
squad were treated with removal treatment.
Precaution
1, to strengthen safety knowledge training and education, enhance the safety awareness of workers, improving their safety skills and self-protection capabilities.
2, increase the production site safety inspection efforts to prevent illegal operations, illegal command.
Xinxiang City Zhenyuan Machinery Co., Ltd. Screening machine is mainly used in metallurgy, coal, building materials, electric power, chemical and food processing and many other industrial sectors, a large number of screening machinery for mineral processing industry is charged with grading, dehydration, mud and de-mediated arduous office. Our screening, sieving High efficiency, uniform fabric, compact structure, technological easy installation, maintenance is simple.
Semi-mobile crushing plant
Semi-mobile crushing plant
2013年7月31日星期三
What are the advantages vertical crusher
Vertical Crusher mainly vertical impact crusher and vertical compound crusher. Vertical Crusher advantages: simple structure, easy operation, energy saving, grading crusher,
dust is small, good wear resistance, long life, and uniform distribution of materials. In addition, vertical crusher
No sieve, thereby overcoming the crusher often high frequency screen clogged. Vertical crusher hammer link uses hinged structure, easy to replace. Vertical crusher surface mounted guard serrated
liner, thus improving the degree of breakage of the material, reduces the noise, increasing
Added wear resistance. Vertical crusher is also an important feature that can be added in front of the traditional ball mill. Preceded by a vertical mill crusher is mainly to
reduce the particle size of the material so that it can play a role in energy conservation. Energy conservation is not only the survival of enterprises
Conditions, but also enhance competitiveness and develop strength needs.
dust is small, good wear resistance, long life, and uniform distribution of materials. In addition, vertical crusher
No sieve, thereby overcoming the crusher often high frequency screen clogged. Vertical crusher hammer link uses hinged structure, easy to replace. Vertical crusher surface mounted guard serrated
liner, thus improving the degree of breakage of the material, reduces the noise, increasing
Added wear resistance. Vertical crusher is also an important feature that can be added in front of the traditional ball mill. Preceded by a vertical mill crusher is mainly to
reduce the particle size of the material so that it can play a role in energy conservation. Energy conservation is not only the survival of enterprises
Conditions, but also enhance competitiveness and develop strength needs.
2013年7月30日星期二
How to select Cone Crusher
Cone crusher can be divided according to purpose in coarse crushing and fine crushing two kinds; according to the structure and function can be divided into hanging cone
crusher, cone crusher and prop shaft vibrating cone crusher three. Used for coarse crushing cone crusher, gyratory crusher known.
Used in crushing cone crusher has two kinds, conventional type cone crusher, the processing of the material after dewatering screen block, and therefore do not need a large feed
opening, but requires increased discharge scope to increase production capacity the crushed product requires a relatively uniform particle size. Moving cone system
A date-shaped, near the discharge port, moving the cone equal to a distance between the parallel strips, in order to ensure uniform particle size of material discharged. Plug
type cone crusher cone surface slope is small because of moving, unloading material rolling down the slope along the moving cone. Therefore, the discharge would be beveled
Frictional resistance, but also by the deflection cone, the rotation of the centrifugal force of inertia. It is not free of such waves crusher discharge, and thus the working
principle and calculation were associated with coarse crushing cone crusher is somewhat different.
Using conventional grinding method, grinding is accidental cross-section, there is no choice, on the one hand be most part, they have a crushing effect, the other will
produce a partial vertical grinding, resulting in the useful part due to excessive pulverization can not be Head close.
It is also vibrating mining screen after crushing material handling initial block, and its feed opening is not large. Its function cone and fixed cone is upright, in order to
achieve selective crushing effect, the moving cone on the spindle by eccentric block, when the motor is driven by a drive unit moving cone spindle rotating eccentric
Turn, create an imbalance exciting force, so that moving cone from the original location. Material from the upper part gives the fixed cone and fixed cone crushing cavity
composed of the crushing chamber from top to bottom during the movement by repeated compression, impact, generally up to 30 times more than the material in this process
constantly flip roll
Move, changing the angle of the force on the material, the material crushing, the material being crushed by the crushing chamber discharge, discharge from the crusher crusher
discharge port.
Cone crusher range of applications
Cone crusher used in metallurgy, construction, road building, chemical and silicate industry, raw material crushing, can crush medium and above medium hardness ores and rocks,
specifically in the following field use mostly.
A cone crusher is widely used in crushing and fine crushing hard materials.
Two raw materials in industrial and mining crushing, when the production volume is small, you can choose jaw or banana screen, but larger companies, all using cone crusher.
3 used for crushing extremely hard materials such as finely divided zirconium corundum, but the operation must take appropriate measures, because this material most material
hardness Mohs hardness of 9.7.
4 products for applications requiring sand vibrating screen grains more occasions, proved, cone crusher products more cubic particles, particularly its size close to the discharge
opening width of that part of the grain size, the shape of the product is good, cubic particles are mostly .
specifically in the following field use mostly.
A cone crusher is widely used in crushing and fine crushing hard materials.
Two raw materials in industrial and mining crushing, when the production volume is small, you can choose jaw or banana screen, but larger companies, all using cone crusher.
3 used for crushing extremely hard materials such as finely divided zirconium corundum, but the operation must take appropriate measures, because this material most material
hardness Mohs hardness of 9.7.
4 products for applications requiring sand vibrating screen grains more occasions, proved, cone crusher products more cubic particles, particularly its size close to the discharge
opening width of that part of the grain size, the shape of the product is good, cubic particles are mostly .
2013年7月29日星期一
Chain crusher
Chain crusher and hammer crusher, impact crusher belong horizontal rotor type crusher, chain crusher according to installation into the form of vertical and horizontal chain
chain crusher crusher two structural forms. Vertical chain crusher is a single rotor, horizontal chain crusher for dual rotors. Chain crusher main working parts with a steel
chain of the rotor, the rotor is connected to one end of the chain, the other end of the chain there is safety chain made of wear-resistant steel head. Chain crusher through the
high-speed rotation of the chain block material impact on pulverized. Horizontal chain crusher double rotor structure, each rotor shaft has its own drive motor, the peripheral
speed of the first chain 28 ~ 78m / s range.
Horizontal chain crusher into the feed intake, body, spout, the rotor (including bearings), gearing and shock absorber components. In order to prevent sticking of the wear plate
body materials, the body lined with rubber plate, on both sides of the body is provided with quick access door open, the body, the drive device is mounted on a base made of
steel, the lower mounting base damper connected with the foundation. Chain crusher long-term use, proven machine easy to use, high efficiency, large production capacity, easy
maintenance. Suitable for crushing kinds of bulk fertilizers and other bulk materials of medium hardness. Horizontal chain crusher plant can crush without drying aqueous 14%, with 6%
free acid and a variety of superphosphate fertilizer phosphorus and potassium compound fertilizer products, which overcomes many domestic compound fertilizer production plant
using vertical chain crusher crusher and other materials in the production operation bonded to the casing wall, resulting in the production can not be shortcomings. Horizontal
chain crusher crushing the compound fertilizer production processes to achieve continuous production, improve production efficiency, reduce labor intensity operations, improved
operating environment. Chain crusher compound fertilizer production line in the application of more fertilizer can be large (mean diameter greater than 4mm), crushed to an
average diameter of 1 ~ 4mm granular fertilizer.
Single rotor hammer crusher
Single rotor hammer crusher hammer crusher is a kind of class are horizontal rotor crusher, which is divided into reversible and non-reversible two types.
Reversible sand screen rotor rotates in one direction first, the material for crushing. The direction of the liner, sieve and hammer ends that are subject to wear. Wear to a
certain extent, reverse the direction of rotation of the rotor, this time using a hammer crusher and the other of the other end of the liner and the sieve work, so the life of
almost continuous doubled. Irreversible single rotor hammer crusher rotor rotates in one direction only. When the end portion of the hammer wear to a certain extent, to stop the
hammer in the direction exchange (to 180 °), or replace the hammer.
Single rotor hammer crusher chassis by the two parts, namely steel plate welded into the various parts bolted into one. From high-manganese steel liner, liner wear can replace
them after. In order to facilitate maintenance, adjustment and replacement screen bars, front and rear chassis on both sides opened a manhole. To facilitate the replacement
hammer, chassis side walls also opened a manhole. crusher machine several rows disc mounted on the spindle, the rotor disc has two rows of pin holes, when the hammer after wear of the
end inserted in the outer hole of the pin, hammer and screen to adjust the gap between the strips. Hammer with a pin hinged between the rows of discs, in order to prevent axial
movement of the disc and hammer, hammer the disc ends with a clamping nut plate and pin fixation. Supported on bearings on both ends of the rotor, bearings bolted to the
chassis. Spindle and motor directly coupled with flexible coupling. For smooth operation of the rotor, the other end of the spindle with the flywheel.
Arcuate bottom of the rotor discharge sieve, sieve mounted at both ends of the beam, with the outermost sieve clamping plate, sieve arrangement direction perpendicular to the
direction of movement of the rotor. Sieve clearance by the protruding portion is formed intermediate sieve. In order to facilitate the discharge of material, sieve sieve formed
between the outward expansion joints, but also the direction of the rotor tilt. In the feed section is also equipped with pads, are the first materials to withstand impact and
abrasion areas. Pads and linings and other components from the pallet assembled. Pallet with steel welded, top liner is high manganese steel castings, assembled with two-axis
rack mounted on the body in the crusher. Available feed angle adjustment bolt to adjust, worn liner can be replaced. Hammer is mounted on the hinge pin on the way, because it is
free-hanging, rotating at high speed hammer flared, encounter difficulties when broken objects, they can swing along the pin, thereby avoiding mechanical damage, plays a
protective effect. When broken hard objects (such as iron objects) into the crushing cavity, under the blows of the hammer, non-broken by a hammer is not discharged to the
screening of the client and the larvae L by an ad hoc regularly removed to avoid a hammer and sieve, etc. mechanical damage. In addition, the drive unit is also equipped with a
special safety device, the use of safety pins, the overload is cut, the motor and the crusher rotor off, play a protective role. '
Reversible sand screen rotor rotates in one direction first, the material for crushing. The direction of the liner, sieve and hammer ends that are subject to wear. Wear to a
certain extent, reverse the direction of rotation of the rotor, this time using a hammer crusher and the other of the other end of the liner and the sieve work, so the life of
almost continuous doubled. Irreversible single rotor hammer crusher rotor rotates in one direction only. When the end portion of the hammer wear to a certain extent, to stop the
hammer in the direction exchange (to 180 °), or replace the hammer.
Single rotor hammer crusher chassis by the two parts, namely steel plate welded into the various parts bolted into one. From high-manganese steel liner, liner wear can replace
them after. In order to facilitate maintenance, adjustment and replacement screen bars, front and rear chassis on both sides opened a manhole. To facilitate the replacement
hammer, chassis side walls also opened a manhole. crusher machine several rows disc mounted on the spindle, the rotor disc has two rows of pin holes, when the hammer after wear of the
end inserted in the outer hole of the pin, hammer and screen to adjust the gap between the strips. Hammer with a pin hinged between the rows of discs, in order to prevent axial
movement of the disc and hammer, hammer the disc ends with a clamping nut plate and pin fixation. Supported on bearings on both ends of the rotor, bearings bolted to the
chassis. Spindle and motor directly coupled with flexible coupling. For smooth operation of the rotor, the other end of the spindle with the flywheel.
Arcuate bottom of the rotor discharge sieve, sieve mounted at both ends of the beam, with the outermost sieve clamping plate, sieve arrangement direction perpendicular to the
direction of movement of the rotor. Sieve clearance by the protruding portion is formed intermediate sieve. In order to facilitate the discharge of material, sieve sieve formed
between the outward expansion joints, but also the direction of the rotor tilt. In the feed section is also equipped with pads, are the first materials to withstand impact and
abrasion areas. Pads and linings and other components from the pallet assembled. Pallet with steel welded, top liner is high manganese steel castings, assembled with two-axis
rack mounted on the body in the crusher. Available feed angle adjustment bolt to adjust, worn liner can be replaced. Hammer is mounted on the hinge pin on the way, because it is
free-hanging, rotating at high speed hammer flared, encounter difficulties when broken objects, they can swing along the pin, thereby avoiding mechanical damage, plays a
protective effect. When broken hard objects (such as iron objects) into the crushing cavity, under the blows of the hammer, non-broken by a hammer is not discharged to the
screening of the client and the larvae L by an ad hoc regularly removed to avoid a hammer and sieve, etc. mechanical damage. In addition, the drive unit is also equipped with a
special safety device, the use of safety pins, the overload is cut, the motor and the crusher rotor off, play a protective role. '
2013年7月28日星期日
Jaw crusher frame bearing or excessive temperature rise within the moving jaw approach
Jaw crusher or jaw rack bearing excessive temperature rise within the possible reasons:
1 bearing off the oil or oil injected too much;
2 hole plug, oil plus not enter;
3 Fly counterweight sheave block position deviation, rack beating;
4 tight sleeve axial movement occurs;
5 cage bearing wear or damage, etc.;
6 Non-bearing temperature rise, but moving jaw gland and end caps bearing friction heat or rack dual damascene cover together with the spindle rotation, friction heat.
Jaw crusher or jaw rack bearing excessive apron feeder temperature rise within the exclusion method:
1 Press the instructions provided on time quantitative refueling;
2 clean hole, tank obstructions;
3 transfer is flying counterweight sheave block position;
4 Remove the rack bearing caps lock firmly fixed bushing and remove the flywheel or sheaves, replacement of the adapter sleeve;
5 Replace the bearings;
6 Replace the cover and the crushing equipment glands, fever or loosen the rack bearing bearing cap on one end, together with the fuse cover with embedded bearing pressed into the
chassis slot, and then set on the bearing cap, remove embedded lid rotation.
1 bearing off the oil or oil injected too much;
2 hole plug, oil plus not enter;
3 Fly counterweight sheave block position deviation, rack beating;
4 tight sleeve axial movement occurs;
5 cage bearing wear or damage, etc.;
6 Non-bearing temperature rise, but moving jaw gland and end caps bearing friction heat or rack dual damascene cover together with the spindle rotation, friction heat.
Jaw crusher or jaw rack bearing excessive apron feeder temperature rise within the exclusion method:
1 Press the instructions provided on time quantitative refueling;
2 clean hole, tank obstructions;
3 transfer is flying counterweight sheave block position;
4 Remove the rack bearing caps lock firmly fixed bushing and remove the flywheel or sheaves, replacement of the adapter sleeve;
5 Replace the bearings;
6 Replace the cover and the crushing equipment glands, fever or loosen the rack bearing bearing cap on one end, together with the fuse cover with embedded bearing pressed into the
chassis slot, and then set on the bearing cap, remove embedded lid rotation.
订阅:
博文 (Atom)