Feeder salient features and installation tips

Feeder and mechanical feeders (eg disc feeder, pendulum feeder, apron feeder, etc.) compared with the following characteristics.no bearing deceleration mechanism does not require moving parts, no lubrication refueling.simple structure, small dimensions, light weight and easy maintenance. less power consumption required drive power is small, the machine does not start when a large starting current low noise.Since stone feeding machine the material in the feeding process is continuously toss, and then jump forward movement of the parabolic trajectory, so wear a small feeding trough for conveying

abrasive Japanese high temperature materials.throughput or feeding capacity easily adjusted, or if the computer control with electronic scales and other ancillary equipment, automatic control.
    Feeder is a new feeding equipment in mining, metallurgy, coal, chemicals, building materials, electricity, machinery manufacturing and food, light industry and other

industrial and mining coal vibrating screen enterprises, has been widely applied, the massive and powdery material from storage silo or hopper uniformly continuous or quantitatively to the subject

Feeding device to go, such as the conveyor, bucket elevator, screening equipment, such as feeding the crusher, mill and other seasonings, as well as for automated, quantitative

ingredients and packaging, in addition to or with electronic scales computer control and other ancillary equipment for the automatic control of the process of production

Automation. feeder design recommendation tilt installation, materials and water for viscous materials can be cut larger to, such as feeder for batching, dosing or automatic weighing, in

order to ensure a uniform and stable feeding amount , to prevent the material gravity, feeder should be installed horizontally use. Installation

Do not disassemble the general installation, after installation around the feeder should be a swimming gap, it is in a free state. An apparatus according to performance

requirements, configuration, materials should be designed to minimize stress on the tank, according to the request of the manufacturer, effective Bunker discharge port shall not

exceed a quarter of width

One, the material flow rate is controlled to a large feeding amount of material, the bottom of the hopper discharge should be high enough at  stopped mining board.