Sinter main structure shaker

       Shaker sinter mainly refers sintering process used in the metallurgical industry shaker , or the sintering machine between the cloth and the cooling operation. Also

called hot griddle . Because hot griddle sieve material has its individual particularity, so in use are different from other sieve, there

Note the use of strict , in order to do plate feeder these precautions Details:
   1 between the vibration source and the screen surface insulating devices must be installed ( insulated tanks or insulation board ) in order to reduce the sinter heat

radiation effect on the vibration source , ensure that the vibration source within the allowable temperature.
   (2) In order to reduce the impact of material on the Belt feeder sieve , sieve boxes by the discharge end of the feed gap of not more than 500mm, its feeding direction should be moving

in the same direction the screen surface material .
   3 funnels, ventilation hood and thermal insulation shall be fixed on the sieve , sieve vibrating with the gap between the parts can not be less than 50mm.
   4 Allow the material temperature of 500-1000 degrees Celsius, but the screen frame to allow the temperature of 300-500 degrees Celsius. Therefore, in the screen surface , and

beamed back to mine funnel wall to be added ventilation or ventilation ensure that the material was .
Sinter vibrating screen working principle and structural features:
    Sinter shaker are seat -mounted . The use of biaxial exciter , the motor is not part of the vibration from outside the trailer for the reverse two motors from synchronous

rotation , so that the sieve in a linear direction for a cyclical reciprocating motion, so as to achieve the purpose of screening . The series sieve shaker with high temperature

resistant

Material, has good heat resistance , no deformation, long life , sieve easy installation, removal easy . This series of vibrating screen using secondary vibration isolation

device can significantly reduce the equipment when working on the basis of the impact , thereby reducing the cost base . The series of beams and shaker

Screen box side panels or heat-resistant stainless steel plate , and using ring groove rivet , not only tighten better, but also greatly reduces the internal stress generated

due to welding .
Summary characteristics of sinter shaker
    1 Suitable for high temperature screening operations , the use of high efficiency
    2 whole strength, stiffness, heat distortion , long service life .
    3 sieve using precision casting , assembly and reasonable retention system screen surface , easy to maintain.
    4 secondary vibration isolation performance optimization, dynamic load transmitted foundation , low noise