Shaker repair and maintenance

1 , shaker though without lubricants, still need to overhaul once a year , replace the liner, on two screen surface to be trimmed so on. To remove the check vibration motor and

to the motor bearing oil , if the bearing is mobile screening plant damaged , replace .
2 , screen grid should always removed periodically check the screen surface is broken or uneven , the crushing plant sieve is blocked and so on.
3, the proposal to create a bracket to hang hanging standby screen surface .
4 , always check the seal, found worn or defective should be replaced.
5 , check the screen grid clamping device class , if loose should be pressed .
6 , the class checks the feed tank connection is loose, if the gap is larger , causing the collision , cause the device to rupture.
7 , the class checks sieve supporting device , observe the hollow rubber mats without significant deformation or degumming , when the rubber pad is damaged or crushed when the

transition should also replace the two hollow rubber mat.