Shaker screening process in the use of techniques

Recently, many customers to ask , shaker during use should pay attention to what issues, and there is no shaker tips. The following is a shaker techniques used , we believe it

will be helpful to you .
    1, check the screen grid on the stone screening machine surface is pressed .
2, check the rubber pad with sieve and rack connections .
3, check the vibrating motor with sieve connections.
4, check the vibrating motor:
5 , check the power supply voltage
6 , check the vibrating motor interlock control devices.
7 , before the start of the security Circular vibrating screen check has removed plywood .
8, check all parts are securely locked :
9 Remove the motor cover and check the relative phase angle of the segments are aligned , tighten the fastening screws the segments .
10 , two motor mounting angle should be consistent.
11 , feed means
12 , to tighten gate .
13 , check the inlet and outlet hose connections are sealed , but not too tight , otherwise it will twist in the sieve body movement break .
14 , no-load test
15 test , the sieve with the rack may not have collision or other unusual sounds.
16 , check the amplitude sieve for reciprocating linear motion may not have distorted and other irregularities .
17 , 10-15 minutes after the operation , using the wrench tightening bolts used the drive mechanism .
Through the use of these techniques vibrating screen , vibrating screen can extend the service life , reduce energy consumption, cost savings, so as to improve economic

efficiency.