Motor feeder installation requirements

1 feeder used for batching , dosing time in order to ensure uniform feeding stability and to prevent gravity materials should be installed horizontally , such as for general

continuous feeding materials Sand vibrating screen can be down-dip 10 ° installation. For viscous materials and high moisture material can be down-dip 15 ° installation.
(2) After installation of the feeder should be left lateral clearance of 20mm should be the level of swimming , hanging device using flexible connections .
3 air test done, the entire bolt once, especially the vibration motor bolts , 3-5 hours of continuous operation should be re- tightened once.
4 when testing two vibrating motors must reverse rotation , current and noise stability , abnormal should promptly stop treatment .
5 motor bearing grease once every February filling , filling the hot season should once monthly oil .
Motor feeder maintenance and requirements:
1 feeder during operation should always check the amplitude of the vibration of the motor current and motor surface Linear vibrating screen temperature , requiring uniform amplitude before and after ,

do not swing around shaking , vibrating motor current stability, such as unusual circumstances , should immediately stop processing .
2 vibration motor bearing lubrication is the entire feeder working key , in the course of second-rate should be raised regularly molybdenum bearing # 2 grease filling once every

two months , the monthly filling the hot season once every six months once the motor overhaul , replacement of internal bearings.