Jaw crusher during operation how to solve problems

Jaw crusher production was less than factory standard Remedy:
A) replace or add crusher;
2) exchange of electrical wiring;
3) discharge opening adjustment to the instructions provided for a nominal discharge opening and increasing crusher for crushing;
4) Check teeth from the size, such as inconsistent with standard replacement jaw plate, align the fixed jaw plate and movable jaw plate relative position, ensuring the top gear

tooth root, the fixed belt weigh feeder clamping to prevent displacement;
5) increase the voltage at work to adapt the host overload requires;
6) Replace bearings or moving the jaw.

Activities jaw broken when working with fixed jaw why beating or crash?
Remedy:
A) True or bolts tight;
2) align the discharge opening, to ensure proper clearance two jaw plates.

Jaw crusher host sheaves, moving jaw functioning normally, but broken cease work? Remedy:
1) Replace tension spring;
2) Replace rod;
3) Re-install or replace brackets.

Jaw crusher host suddenly stop (commonly known as: boring car) exclusion method:
1) Clear the blockage discharge opening to ensure smooth flow of the material; 2) tighten or replace the V-belt; 3) Re-install or sand vibrating screen replace adapter bushing; 4) alignment workplace

voltage, to conform to the host operating voltage requirements; 5) Replace the bearing.