Vibrating screen use and maintenance

 

Use common sense shaker

The choice of models: mainly based on the following criteria to determine:
   1, the name of the screening material, bulk specific gravity, viscosity, temperature,
   2, the processing amount per hour
   3, screen mesh
   4, material particle size ratio and the required screening accuracy
   5, the material pH (determined using 304 # stainless steel or 316L stainless steel)
   6, production sites placed shaker space dimensions

Shaker installation:crushing and screening plant

   1 Remove the transport support. Because screening machine base and the screen frame is connected by a spring, so the transportation transport support through the upper sieve

machine securely. After entering the installation site should be taken down transport support. Prohibited not take transportation support test machine.
   2, the screen should be installed in a horizontal basis. Occasions without laying the foundation should be laid between the base table and vibration-proof rubber sheet.
   3, vibrating sieve machine motor and cables experiencing severe vibration, for safety standards should be connected to ground.vibrating screen manufacturers