Single rotor hammer crusher

Single rotor hammer crusher hammer crusher is a kind of class are horizontal rotor crusher, which is divided into reversible and non-reversible two types.

Reversible sand screen rotor rotates in one direction first, the material for crushing. The direction of the liner, sieve and hammer ends that are subject to wear. Wear to a

certain extent, reverse the direction of rotation of the rotor, this time using a hammer crusher and the other of the other end of the liner and the sieve work, so the life of

almost continuous doubled. Irreversible single rotor hammer crusher rotor rotates in one direction only. When the end portion of the hammer wear to a certain extent, to stop the

hammer in the direction exchange (to 180 °), or replace the hammer.

Single rotor hammer crusher chassis by the two parts, namely steel plate welded into the various parts bolted into one. From high-manganese steel liner, liner wear can replace

them after. In order to facilitate maintenance, adjustment and replacement screen bars, front and rear chassis on both sides opened a manhole. To facilitate the replacement

hammer, chassis side walls also opened a manhole. crusher machine several rows disc mounted on the spindle, the rotor disc has two rows of pin holes, when the hammer after wear of the

end inserted in the outer hole of the pin, hammer and screen to adjust the gap between the strips. Hammer with a pin hinged between the rows of discs, in order to prevent axial

movement of the disc and hammer, hammer the disc ends with a clamping nut plate and pin fixation. Supported on bearings on both ends of the rotor, bearings bolted to the

chassis. Spindle and motor directly coupled with flexible coupling. For smooth operation of the rotor, the other end of the spindle with the flywheel.

Arcuate bottom of the rotor discharge sieve, sieve mounted at both ends of the beam, with the outermost sieve clamping plate, sieve arrangement direction perpendicular to the

direction of movement of the rotor. Sieve clearance by the protruding portion is formed intermediate sieve. In order to facilitate the discharge of material, sieve sieve formed

between the outward expansion joints, but also the direction of the rotor tilt. In the feed section is also equipped with pads, are the first materials to withstand impact and

abrasion areas. Pads and linings and other components from the pallet assembled. Pallet with steel welded, top liner is high manganese steel castings, assembled with two-axis

rack mounted on the body in the crusher. Available feed angle adjustment bolt to adjust, worn liner can be replaced. Hammer is mounted on the hinge pin on the way, because it is

free-hanging, rotating at high speed hammer flared, encounter difficulties when broken objects, they can swing along the pin, thereby avoiding mechanical damage, plays a

protective effect. When broken hard objects (such as iron objects) into the crushing cavity, under the blows of the hammer, non-broken by a hammer is not discharged to the

screening of the client and the larvae L by an ad hoc regularly removed to avoid a hammer and sieve, etc. mechanical damage. In addition, the drive unit is also equipped with a

special safety device, the use of safety pins, the overload is cut, the motor and the crusher rotor off, play a protective role. '